revsecurity.dylib is not 64-bit on macOS

[kee nethery via use-livecode]

Trying to upload to the Mac App Store and I get this error.

“Unsupported Architectures. Your executable contained the following disallowed architectures: ‘[i386 (in com.elloco.ellocotools.pkg/Payload/El Loco Tools.app/Contents/MacOS/revsecurity.dylib)]’. New apps submitted to the Mac App Store must support 64-bit starting January 2018, and Mac app updates and existing apps must support 64-bit starting June 2018.”

Is there a 64-bit revsecurity.dylib I can download and swap in to replace the 32-bit version installed by LiveCode Standalone App Builder?

Alternatively, what functionality must I remove from my app so that revsecurity.dylib does not get installed (or can be safely removed manually)?

Kee Nethery

[Brian Milby via use-livecode]

Just need to de-fat the file. Need to change to the location within the
app package in the terminal and use the following command:

lipo revsecurity.dylib -remove i386 -output revsecurity.dylib

May need to use "sudo". Also, will need to resign the app after doing so.

On Mon, Dec 3, 2018 at 3:43 PM kee nethery via use-livecode <

Post by kee nethery via use-livecode
Trying to upload to the Mac App Store and I get this error.
“Unsupported Architectures. Your executable contained the following
disallowed architectures: ‘[i386 (in com.elloco.ellocotools.pkg/Payload/El
Loco Tools.app/Contents/MacOS/revsecurity.dylib)]’. New apps submitted to
the Mac App Store must support 64-bit starting January 2018, and Mac app
updates and existing apps must support 64-bit starting June 2018.”
Is there a 64-bit revsecurity.dylib I can download and swap in to replace
the 32-bit version installed by LiveCode Standalone App Builder?
Alternatively, what functionality must I remove from my app so that
revsecurity.dylib does not get installed (or can be safely removed
manually)?
Kee Nethery
_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

[panagiotis merakos via use-livecode]

Hello all,

This will be fixed in the next LiveCode release. If you can't wait, you can
apply the fix locally:

https://github.com/livecode/livecode/pull/6806

Best,
Panos

On Mon, Dec 3, 2018, 21:56 Brian Milby via use-livecode <

Post by Brian Milby via use-livecode
Just need to de-fat the file. Need to change to the location within the
lipo revsecurity.dylib -remove i386 -output revsecurity.dylib
May need to use "sudo". Also, will need to resign the app after doing so.
On Mon, Dec 3, 2018 at 3:43 PM kee nethery via use-livecode <

Post by kee nethery via use-livecode
Trying to upload to the Mac App Store and I get this error.
“Unsupported Architectures. Your executable contained the following
disallowed architectures: ‘[i386 (in

com.elloco.ellocotools.pkg/Payload/El

Post by kee nethery via use-livecode
Loco Tools.app/Contents/MacOS/revsecurity.dylib)]’. New apps submitted to
the Mac App Store must support 64-bit starting January 2018, and Mac app
updates and existing apps must support 64-bit starting June 2018.”
Is there a 64-bit revsecurity.dylib I can download and swap in to replace
the 32-bit version installed by LiveCode Standalone App Builder?
Alternatively, what functionality must I remove from my app so that
revsecurity.dylib does not get installed (or can be safely removed
manually)?
Kee Nethery
_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

[Matthias Rebbe via use-livecode]

Has anyone on the list already applied the fix locally and would like to share the modified file?

Regards,
Matthias


Matthias Rebbe

free tools for Livecoders:
https://instamaker.dermattes.de
https://winsignhelper.dermattes.de

Post by panagiotis merakos via use-livecode
Hello all,
This will be fixed in the next LiveCode release. If you can't wait, you can
https://github.com/livecode/livecode/pull/6806
Best,
Panos
On Mon, Dec 3, 2018, 21:56 Brian Milby via use-livecode <

Post by Brian Milby via use-livecode
Just need to de-fat the file. Need to change to the location within the
lipo revsecurity.dylib -remove i386 -output revsecurity.dylib
May need to use "sudo". Also, will need to resign the app after doing so.
On Mon, Dec 3, 2018 at 3:43 PM kee nethery via use-livecode <

Post by kee nethery via use-livecode
Trying to upload to the Mac App Store and I get this error.
“Unsupported Architectures. Your executable contained the following
disallowed architectures: ‘[i386 (in

com.elloco.ellocotools.pkg/Payload/El

Post by kee nethery via use-livecode
Loco Tools.app/Contents/MacOS/revsecurity.dylib)]’. New apps submitted to
the Mac App Store must support 64-bit starting January 2018, and Mac app
updates and existing apps must support 64-bit starting June 2018.”
Is there a 64-bit revsecurity.dylib I can download and swap in to replace
the 32-bit version installed by LiveCode Standalone App Builder?
Alternatively, what functionality must I remove from my app so that
revsecurity.dylib does not get installed (or can be safely removed
manually)?
Kee Nethery
_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
http://lists.runrev.com/mailman/listinfo/use-livecode

[Brian Milby via use-livecode]

Two files to update:

https://raw.githubusercontent.com/livecodepanos/livecode/78435e7a4e36ed0a0892262e88310adff2efc897/ide-support/revsaveasstandalone.livecodescript

https://raw.githubusercontent.com/livecodepanos/livecode/78435e7a4e36ed0a0892262e88310adff2efc897/ide-support/revsblibrary.livecodescript


On Tue, Dec 4, 2018 at 5:16 AM Matthias Rebbe via use-livecode <

Post by Matthias Rebbe via use-livecode
Has anyone on the list already applied the fix locally and would like to
share the modified file?
Regards,
Matthias
Matthias Rebbe
https://instamaker.dermattes.de
https://winsignhelper.dermattes.de

Am 03.12.2018 um 23:23 schrieb panagiotis merakos via use-livecode <
Hello all,
This will be fixed in the next LiveCode release. If you can't wait, you

can

https://github.com/livecode/livecode/pull/6806
Best,
Panos
On Mon, Dec 3, 2018, 21:56 Brian Milby via use-livecode <

Post by Brian Milby via use-livecode
Just need to de-fat the file. Need to change to the location within the
lipo revsecurity.dylib -remove i386 -output revsecurity.dylib
May need to use "sudo". Also, will need to resign the app after doing

so.

Post by Brian Milby via use-livecode
On Mon, Dec 3, 2018 at 3:43 PM kee nethery via use-livecode <

Post by kee nethery via use-livecode
Trying to upload to the Mac App Store and I get this error.
“Unsupported Architectures. Your executable contained the following
disallowed architectures: ‘[i386 (in

com.elloco.ellocotools.pkg/Payload/El

Post by kee nethery via use-livecode
Loco Tools.app/Contents/MacOS/revsecurity.dylib)]’. New apps submitted

to

Post by Brian Milby via use-livecode

Post by kee nethery via use-livecode
the Mac App Store must support 64-bit starting January 2018, and Mac

app

Post by Brian Milby via use-livecode

Post by kee nethery via use-livecode
updates and existing apps must support 64-bit starting June 2018.”
Is there a 64-bit revsecurity.dylib I can download and swap in to

replace

Post by Brian Milby via use-livecode

Post by kee nethery via use-livecode
the 32-bit version installed by LiveCode Standalone App Builder?
Alternatively, what functionality must I remove from my app so that
revsecurity.dylib does not get installed (or can be safely removed
manually)?
Kee Nethery
_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
Please visit this url to subscribe, unsubscribe and manage your
http://lists.runrev.com/mailman/listinfo/use-livecode

_______________________________________________
use-livecode mailing list
http://lists.runrev.com/mailman/listinfo/use-livecode

[William Prothero via use-livecode]

Folks:
I’m just curious if anybody has tried to use Livecode to read pre-2004 Quicken files. They are in binary, and the current Quicken, and Quicken2007 (which I have) will no longer read them.

I’m trying to recover archives of old transactions and checking whether it’s even feasible.

Best,
Bill

William A. Prothero
http://earthlearningsolutions.org

[Richmond via use-livecode]

Dunno anything about this at all: but, as it says in the Gospel of
Thomas, "If you have eyes you should look",
so . . .

poking about on the internet I found that

"The /old format/ was called QIF (/Quicken/ Interchange Format).
The new format, called OFX (Open Financial Exchange),
makes it much easier to activate accounts ... "

and further along, so to speak, I found out 2 interesting things:

"A QIF file is an ASCII <https://techterms.com/definition/ascii> text
file generated by Quicken financial software. It contains a user's
financial liability and cash accounts in a text format that can easily
be read by other programs, including text editors. QIF files are used to
transfer data between different Quicken data files or from a financial
institution's website to Quicken software."

and

"
The QIF format was originally developed by Intuit, but it is now
supported by several financial and accounting programs. Some of these
programs include *Microsoft Money*, *Corel Quattro Pro*, and *GnuCash*.
*You can import a QIF file in Quicken by selecting* File → Import → QIF
file, navigate to the location of the file, and choose the account to
which you want to import the QIF file."

I wonder if you have tried File → Import → QIF, that might be all that
is required.

Best, Richmond.

Post by William Prothero via use-livecode
I’m just curious if anybody has tried to use Livecode to read pre-2004 Quicken files. They are in binary, and the current Quicken, and Quicken2007 (which I have) will no longer read them.
I’m trying to recover archives of old transactions and checking whether it’s even feasible.
Best,
Bill
William A. Prothero
http://earthlearningsolutions.org
_______________________________________________
use-livecode mailing list
http://lists.runrev.com/mailman/listinfo/use-livecode

[Matthias Rebbe via use-livecode]

Here´s a page which explains the structure of a qif file

http://linuxfinances.info/info/financeformats.html

Regards,
Matthias

Matthias Rebbe

free tools for Livecoders:
https://instamaker.dermattes.de
https://winsignhelper.dermattes.de

Post by William Prothero via use-livecode
I’m just curious if anybody has tried to use Livecode to read pre-2004 Quicken files. They are in binary, and the current Quicken, and Quicken2007 (which I have) will no longer read them.
I’m trying to recover archives of old transactions and checking whether it’s even feasible.
Best,
Bill
William A. Prothero
http://earthlearningsolutions.org
_______________________________________________
use-livecode mailing list
http://lists.runrev.com/mailman/listinfo/use-livecode